Table of Contents
Open vSwitch: Create TunTap Devices
Book a call
Open vSwitch (OVS) is a multi-layer software switch designed to enable massive network automation and programmability while providing support for standard management protocols.
Apart from its extensive feature set, one of the key advantages of OVS is its support for networking tunnelling protocols, a use case that is widely employed in software-defined networking (SDN) deployments.
In this regard, we will introduce you to the Tun/Tap network devices, which are a key feature of the Linux kernel and are used for creating network bridges. Specifically, this article will guide you on how to create TunTap devices using an Open vSwitch (OVS) bridge and allocate static IPs to the virtual ports.
Creating TunTap Devices
TunTap devices are software network interfaces provided by the Linux kernel. They can be created and managed just like physical network interfaces.
Create Network Interface
We have two commands above, the first command adds vSwitch0 to the br0 bridge and the second command sets internal type to the vSwitch0 interface.
Add the Physical Network Interface to the Bridge
Traffic will now flow between the physical network interface and the Open vSwitch bridge. Remember to change eno1 with your Physical Network Interface.
Create TunTap device
Attach TunTap to Bridge
You should now have a tap device called vport0 which is part of the br0 OVS bridge.
Allocating Static IP Addresses
Static IP addressing, as opposed to dynamic addressing, is when a device keeps the same IP address every time it connects to the network.
Assign Gateway IP to Bridge's Internal Switch
To assign a Gateway IP address to internal Switch, perform the following steps:
/24 is a netmask.
Assign Static IP to TunTap device
To assign a static IP address to your newly created vport0 interface, perform the following steps:
Remove the current IP from the device (if any):
Now, you can assign a new IP address. The following command will assign IP 172.168.1.100 to vport0:
Up all the Interfaces and TunTaps
These two commands will up all your interfaces. You can verify the same by running ifconfig command.
IP Forwarding & NAT Configuration
Enable IP Forwarding on the Host
IP forwarding is the ability for an operating system to accept incoming network packets on one interface, recognize that it is not meant for the system itself, but that it should be passed on to another network, and then forwards it accordingly.
Make NAT Configuration for Internt Access
You can use a NAT device to allow resources in private subnets to connect to the internet, other VPCs, or on-premises networks. These instances can communicate with services outside the VPC, but they cannot receive unsolicited connection requests.
Traffic will now flow between the physical network interface and the Open vSwitch bridge. Remember to change eno1 with your Physical Network Interface.
Conclusion
This guide has walked you through the process of creating TunTap devices using OVS bridge and assigning static IPs to the virtual ports on Ubuntu 20.04.
With this knowledge, you can effectively set up and manage virtual network interfaces in your environment.
Please remember that, as with all things, practice furthers understanding. So, feel free to experiment with different configurations to fully comprehend the flexible nature of Open vSwitch.
Stay tuned for more insightful articles on advanced networking with Open vSwitch!
Source: This blog is authored by Faiz Ahmed, Principal Technical Consultant at GeekyAnts. Originally published on Hashnode: Read here.
Dive deep into our research and insights. In our articles and blogs, we explore topics on design, how it relates to development, and impact of various trends to businesses.
